SILICONES INDIA SAVES EARTH & ENVIRONMENT BY MANUFACTURING HEAT RESISTANT PRODUCTS

+91 85265 35312

Call for any Support

Silicone Grease – (General Purpose) SI - G – 100

Special Features & Application

Ideal Release Agent for:

  • Epoxy, Polystyrene, Polyvinylchloride, Polyester resins, and other plastic/rubber molding operations
  • Coating press platens to prevent mold adherence
  • Treating porous mold surfaces with a single coating for multiple applications
  • Plywood industry - prevents glue from fouling machinery
  • Shell molding process for breaking in new or freshly cleaned patterns
  • Release agent on chilled castings of brass, zinc plate, etc.

Excellent for:

  • Insulation in ignition systems, plug connections, X-ray and electronic instruments
  • Lubricating glass joints, stop valves, hot equipment, rubber/plastic seals
  • Polishing rubber, leather, wood, and wooden furniture

Typical Properties

Colour Greyish White, Translucent
Consistency Vaseline-like Thixotropic
Specific Gravity 1.0 at 25°C
Service Temperature -40°C to 20°C
Short-term Service Temp -50°C to 240°C
Unworked Penetration 230 – 250
Worked Penetration 270
Bleed (after 24 hrs at 200°C) 2% Max.
Volatility (after 24 hrs at 200°C) 3% Max.
Electric Strength 10KV
Dispersibility Hydrocarbons, Chlorinated hydrocarbons, Ketones

Shelf Life

The product can be stored in a cool place @20 to 30C of temperatures. Minimum of 6 Months to 1 Year is the best Product Life from Manufacturing or Supply Date.

Safety

The material is non-flammable, non-toxic, and inert. No skin irritation is observed, as the product is in regular use for over 40 years. In case of contact with the eyes, temporary irritation may occur, but flushing the eyes with water will alleviate the discomfort.